Quantum SDLT 320 Manual de usuario Pagina 54

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 150
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 53
CHAPTER 4: Installing Your Tape Drive SDLT 220 and SDLT 320 Product Manual
4-2 March 2004 81-85002-01
4.1 Safety, Handling, and ESD Protection
Inappropriate or careless handling of tape systems may result in damage to the
product. Follow the precautions and directions to prevent damaging the tape
system. In addition, follow the pre-installation guidelines to ensure that you have
the correct hardware for your system configuration.
4.1.1 Safety Precautions
For your safety, follow all safety procedures described here and in other sections of
the manual.
1. Remove power from the system before installing or removing the tape drive to
prevent the possibility of electrical shock or damage to the tape drive. Unplug
the unit that contains or is to contain the drive from AC power to provide an
added measure of safety.
2. Read, understand, and observe all label warnings.
3. The POS uses a Class I laser product. This laser product complies with 21
CFR 1040.10 as applicable on the date of manufacture.
CAUTION: While the tape drive chassis is open, you can be exposed
to invisible laser radiation; take care to avoid direct
exposure to the beam.
Vista de pagina 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 149 150

Comentarios a estos manuales

Sin comentarios