Quantum SDLT 320 Manual de usuario Pagina 76

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 150
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 75
CHAPTER 4: Installing Your Tape Drive SDLT 220 and SDLT 320 Product Manual
4-24 March 2004 81-85002-01
Figure 4-8. AC Power Cord Connector Types
The power supply of the tabletop unit has an auto-sensing feature; no adjustment
or switch setting changes are required for different AC sources.
Refer to Figure 4-7 and Figure 4-8. Connect one end of the AC cord into the power
connector on the back of the tabletop drive; connect the other end of the cord to the
AC outlet. Upon completion, proceed to the next section to confirm the
installation.
4.5 Confirming the Installation
To confirm the installation, power on the SDLT system and the host computer. The
screens displayed at power-up contain BIOS, operating system, and SCSI
controller information. If the first screen displays host adapter and SCSI ID
information, then the system is being recognized and the installation is successful.
Refer to “Troubleshooting” on page 5-17 if the installation is not successful.
Vista de pagina 75
1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 149 150

Comentarios a estos manuales

Sin comentarios