Quantum EC-LLDAA-YF-B Guía de usuario Pagina 48

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 210
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 47
Chapter 3 Operating the Autoloader
Using Cartridges
28 Quantum SuperLoader 3 User’s Guide
Using Cartridges
Typically, when you first install the autoloader, you load your cartridges
into the magazines and then load the magazines into the autoloader.
However, you can insert and eject cartridges individually using the
mailslot, or you can eject a magazine, manually load and unload
cartridges, then load the magazine back into the autoloader. The
autoloader automatically detects the presence of a cartridge in the
magazine slot.
Note: On the front panel menu, whenever you see Enter or Eject, it
means the cartridge enters and leaves the autoloader through
the mailslot. Whenever you see
Load or Unload, it means the
cartridge is loaded into or unloaded from the tape drive.
If you try to perform an illegal operation, the autoloader refuses to
perform the operation. For example, if you try to load a cartridge
through the mailslot to the drive, but the drive already contains a
cartridge, the mailslot does not unlock. If you try to unload a cartridge
from the drive while the autoloader is writing to the tape, the command
will not be initiated until the write command is completed.
WARNING: If a tape cartridge is holding the mailslot door open on
power up, the robot will not move. The system detects
that the mailslot door is open but cannot detect the
presence of the cartridge. If the mailslot door is open, the
bar code scanner laser light may shine out the door and
potentially cause physical injury.
With the mailslot door open, do not insert your hand
through the mailslot door. This is to prevent bodily injury
from the robot. Precautions are in place to prevent the
robotic mechanism functioning in this circumstance.
If the tape cartridge is holding the mailslot door open
during operation, the system keeps track of the tape
movement and continues robotic motion. This can occur
if the robot ejects the cartridge out through the mailslot
door.
Vista de pagina 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 209 210

Comentarios a estos manuales

Sin comentarios