
Chapter 4 On-board Remote Management
Configurations Page
Quantum SuperLoader 3 User’s Guide 53
Setting Security Options
When you enable the security option, users must enter a password to
access the autoloader's front panel functionality. A password allows
either administrator-level access or operator-level access (see “
Setting
Security” on page 73). To set security:
1 From any page, click the
Configurations heading. The Configurations
screen displays.
2 On the left-hand side of the screen, click
Security. The System
Security
section of the screen displays.
3 To enable front panel security, select the check box next to
Front
Panel Security Enabled
.
4 If the check box is blank, the security option for the front LCD panel
is not enabled.
5 Click
submit.
To reset the front panel password:
1 From any page, click the
Configurations heading. The Configurations
screen displays.
2 On the left-hand side of the screen, click
Security.
3 Select the check box next to
Reset Front Panel Password. A check
mark displays.
4 Click
submit.
To se t
User Administration:
1 From any page, click the
Configurations heading. The Configurations
screen displays.
2 On the left-hand side of the screen, click
Security.
3 From the drop-down list next to
Select User Type, select Operator 1,
Operator 2, Administrator 1 or Administrator 2.
4 In the
Username field, enter a user name.
5 In the
Password field, enter the new password.
6 In the
Verify Password field, re-enter the same new password.
7 Click
submit.
Comentarios a estos manuales