Quantum DLT VS160 Manual de usuario descargar pdf (Pagina 16)

Installing the ValueLoader

Installation Overview

2 Quantum ATL ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual

Installation Overview 1

Installing the ValueLoader consists of the following steps, which

are explained in more detail later in this section.

1 Choose a location for the ValueLoader (page 6).

2 Unpack and check the ValueLoader for shipping damage

(page 7

3 Identify the accessories that come with the ValueLoader

(page 8

4 Install the ValueLoader in a computer rack or select a table or

desktop near the host server (page 9

5 Shut down, turn off, and remove power from the server and all

devices attached to the server (page 12

6 Attach the SCSI cable to the ValueLoader and server’s SCSI

host adapter (page 12

7 Attach the power cable to the ValueLoader and plug in the

power cable to the nearest power outlet (page 12

). Power the

ValueLoader on to ensure it passes the power-on self test.

8 Set the SCSI ID for the ValueLoader, if necessary (page 14.

9 Set up the host and verify the connection (page 14).

Understanding ValueLoader Features 1

The ValueLoader is a SCSI-2 low-voltage differential (LVD) data

storage device that incorporates a DLT VS80 or DLT VS160 tape

drive, and eight tape slots. The ValueLoader operates as a single

SCSI device with two Logical Unit Numbers (LUNs), one for the

tape drive (0) and the other for the ValueLoader robotics (1).

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 89 90

Sin comentarios

Quantum DLT VS160 Manual de usuario Pagina 16