Quantum DLT VS160 Manual de usuario descargar pdf (Pagina 43)

Operating the ValueLoader

Using Cartridges

Quantum ATL ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 29

4 Press the [+] or [–] button until “Import” appears on the LCD

screen. Press

[Enter] to select.

5 Press the [+] or [–] button until the desired slot number appears

on the LCD screen and press the

[Enter] button. You are not

given the option to import a cartridge to an occupied slot.

6 When “Insert Cartridge Slot” appears on the LCD screen and

the Import/Export slot opens, insert the desired data cartridge

into the Import/Export slot so that the write-protect switch is

facing out from the ValueLoader and toward the right.

7 Repeat steps 5 and 6 as needed for additional cartridges.

8 Press the [Cancel] button when you have finished importing

cartridges.

9 Verify that the LCD screen shows that the desired slots have

cartridges installed.

Figure 12 Importing a

Cartridge

Exporting

Cartridges

This option moves a cartridge from a specific slot to the Import/

Export slot. To export one or more cartridges from the

ValueLoader, follow these steps:

Note: If you are using the Operator’s Panel to clean the

drive, import the cleaning cartridge only when the

front panel indicates that cleaning is needed. You

may keep a cleaning cartridge in the ValueLoader if

the backup software can manage the drive cleaning.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 89 90

Sin comentarios

Quantum DLT VS160 Manual de usuario Pagina 43