Quantum DLT VS160 Manual de usuario descargar pdf (Pagina 48)

Operating the ValueLoader

Cleaning the Tape Drive

34 Quantum ATL ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual

• Do not place DLTtape cartridges near sources of

electromagnetic energy or strong magnetic fields, such as

computer monitors, electric motors, speakers, or X-ray

equipment. Exposure to electromagnetic energy or magnetic

fields can destroy data on cartridges.

• Place identification labels only in the slide-in slot on the front

of the cartridge.

Cleaning the Tape Drive 2

When the Clean Drive LED is on, the ValueLoader’s tape drive

needs to be cleaned. An illuminated Media Attention LED or an

exclamation point (!) in the inventory display may also indicate

that the tape drive needs to be cleaned. Cleaning typically takes

several minutes, during which the Ready LED blinks.

Each cleaning cartridge has an approximate life of 20 cleanings.

The cleaning cartridge includes a label with 20 small boxes printed

on it. Always place a check mark in a box each time you use the

cartridge to clean the drive. Replace the cleaning cartridge when

all boxes are checked.

The drive cannot keep track of how many times a cartridge has

been used. Therefore, if you are using backup software to manage

cleaning, then you must monitor the software logs or use some

other method to determine when you need to replace the cleaning

tape. Refer to the backup software documentation for more

information. Also refer to the backup software documentation for

information on enabling automatic or scheduled cleanings with the

use of a dedicated cleaning slot.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 89 90

Sin comentarios

Quantum DLT VS160 Manual de usuario Pagina 48