Quantum DLT VS160 Manual de usuario descargar pdf (Pagina 61)

ValueLoader Administration

Retrieving Information About the ValueLoader

Quantum ATL ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual 47

The “Test Count” displays the number of load-calibrate-unload

cycles that have been completed during the test.

4 Press the [Cancel] button to end the test.

Retrieving Information About the ValueLoader 3

The Information menu provides access to information about the

ValueLoader, including the cycle count, event log, and firmware

revision.

Cycle Count 3

This option displays the total system cycle count, incrementing

each time a tape is loaded into the drive or exported from the

ValueLoader.

To use this option, follow these steps:

1 From the Home screen or main menu, press the [+] or [–] button

until “Information” appears on the top line of the LCD screen.

2 Press the [Enter] button to access the available options.

3 Press the [+] or [–] button until “Cycle Count” appears on the

LCD screen.

The LCD screen displays the total cycle count.

4 Press the [Cancel] button when done.

View Event Log 3

This option provides access to the most recent ValueLoader errors

and events (see table 5

on page 63 for a description of error codes).

From the Home screen or main menu, press the

[+] or [–] button

until “Information” appears on the top line of the LCD screen.

1 Press the [Enter] button to access the available options.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 89 90

Sin comentarios

Quantum DLT VS160 Manual de usuario Pagina 61