Quantum 1200 Series DAT Autochanger Guía de usuario descargar pdf (Pagina 143)

SDLT 600 SCSI Interface Guide Chapter 4: SCSI Commands

81-81200-02 REV A01 January 2005 4-101

MaxBurstSize Binary 0080h 2 Specifies the maximum amount of

data to be transferred without

disconnecting. A value of 0 sets

no limit. This value is given in

512-byte increments. For example,

a value of 8 indicates 4 KB. The

drive rounds values that are not

multiples of 8 down to the nearest

multiple of 8. Minimum value of

this field is 0000h, maximum value

is FFFFh.

Mod4FixedSize Binary 0 1 When set to 1, limits fixed block

MODE SELECT lengths to a

multiple of 4 bytes.

NoDeferRcvdErr Binary 0 1 When set to 1, the drive reports a

deferred recovered error as a current

recovered error.

NoSCSIEject Binary 0 1 Disables ejection of the cartridge at

the completion of an unload

operation initiated by a SCSI

LOAD UNLOAD command.

RedundancyMode Decimal 1 1 Sets the value of the allowed

maximum marginal channel. Valid

values are 0 to 7.

RepBusyInProg Binary 0 1 When set to 1, the drive reports

BUSY status if it is in the process of

becoming ready.

RepMAMAvailUA ASCII 0 1 When set, the drive reports a UNIT

ATTENTION when the EMAM

data is available.

ReportRcvdPerrs Binary 1 1 When set to 1, the drive reports a

recovered error if parity error

retried successfully.

ReportRcvdRdErr Binary 0 1 Sets the default value of the PER bit

of the Read / Write Error Recovery

Mode Page (01h).

RepUaOnSeqUnld Binary 0 1 Obsolete.

Table 4-58. EEPROM Vendor Specific MODE SELECT Page — Parameter Descriptions

Parameter Name

Data

Type

Default

Length

(Bytes)

Usage

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 293 294

Comentarios a estos manuales

Sin comentarios

Quantum 1200 Series DAT Autochanger Guía de usuario Pagina 143

Comentarios a estos manuales

Relacionado con productos y manuales para Software Quantum 1200 Series DAT Autochanger