
Appendix C DLTtape Cartridge Maintenance
Visual Inspection of DLTtape Cartridges
ATL M-Series User’s Guide 163
2 Gently shake the tape cartridge. Listen for any rattling of loose pieces
inside the cartridge.
3 Locate the reel lock openings (see figure 61
) and verify that you can
see the reel locks.
The reel locks are small plastic tabs near the center of the reel lock
openings. They can be broken if the cartridge is dropped.
Figure 61 Location of
the Reel Locks and
the Hub
4 Verify that the spring-loaded hub (see figure 61) is centered within
the circular opening in the tape cartridge.
5 Gently press the hub, then release it. Make sure the hub springs back
into place and is still centered within its circular opening.
6 Open the tape cartridge door (see figure 62
):
a Gently press up on the tab at the right side of the tape cartridge
door.
Caution: If you hear anything loose inside the cartridge, do not
use the cartridge.
Caution: If the reel locks are not visible, do not use the
cartridge.
Reel lock
opening
Reel lock
opening
Spring-
loaded hub
Comentarios a estos manuales