Quantum MC300 Guía de usuario Pagina 52

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 222
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 51
Chapter 2 Basic Operations
Using the Mailbox
34 ATL M-Series User’s Guide
Exporting a Cartridge in 1-Slot Mode 2
To export a cartridge in 1-slot mode:
1 Use the backup software to export a cartridge to the first slot of the
top left magazine.
2 On the main screen, press
Mailbox.
The GUI displays the
Mailbox screen (see figure 22).
3 Press
Open.
The GUI displays the
Mailbox - OPEN screen (see figure 23).
4 Press the button next to the top left magazine access door and open
the door.
5 Pull the magazine forward until it stops.
6 Remove the exported cartridge from the magazine.
7 Reinsert the magazine into the library.
8 Close the magazine access door.
9 On the
Mailbox - OPEN screen, press Re-Lock.
The library locks the magazine access door.
Configuring the
Mailbox
2
By default, the Import/Export option is set to MAP. To change this setting:
1 On the main screen, press
Mailbox.
The GUI displays the
Mailbox screen (see figure 22).
2 On the
Mailbox screen, press Config.
The GUI displays the
Configuration screen, with the Import/Export
option highlighted.
3 Use the
Up and Down buttons to select the desired Import/Export
setting. The available settings are
None, 1-Slot, 10-Slot (or 12-Slot in
LTO libraries), and
MAP.
Note: The default setting is
MAP. For more information about
these settings, see Changing the Import/Export Setting
on
page 64.
Vista de pagina 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 221 222

Comentarios a estos manuales

Sin comentarios