Quantum MC300 Guía de usuario Pagina 72

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 222
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 71
Chapter 3 Changing the Library Configuration
Changing the Emulation Setting
54 ATL M-Series User’s Guide
Changing the Emulation Setting 3
The Emulation option allows you to set the library to act as either a
Quantum ATL library or an M4 Data library.
To set the emulation:
1 Access the
Configuration screen (see Accessing the Configuration
Screen on page 49).
2 Press the
Up or Down buttons until Emulation is highlighted.
3 Press
Select.
4 Use the
Up or Down buttons to select the desired Emulation setting.
The available settings are
ATL M2500, ATL 1500, and M4 Data.
5 Press
Select.
To return to the
Configuration screen without changing the option
setting, press
Cancel.
6 Press
Main to return to the main screen.
Note: The default setting for the ATL M1500 is
M4 Data; the
default setting for the ATL M2500 is
ATL M2500.
Note: You must reboot the library before this setting will take
effect.
Vista de pagina 71
1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 221 222

Comentarios a estos manuales

Sin comentarios