
Chapter 3 Changing the Library Configuration
Changing the Auto-Clean Setting
66 ATL M-Series User’s Guide
4 Use the Up or Down buttons to select the desired Import/Export setting.
The available settings are
None, 1-Slot, 10-Slot (or 12-Slot in LTO
libraries), and
MAP.
5 Press
Select.
To return to the
Configuration screen without changing the option
setting, press
Cancel.
6 Press
Main to return to the main screen.
Changing the Auto-Clean Setting 3
To enable or disable Auto-Clean:
1 Access the
Configuration screen (see Accessing the Configuration
Screen on page 49).
2 Press the
Up or Down buttons until Auto-Clean is highlighted.
3 Press
Select.
4 Use the
Up or Down buttons to select the desired Auto-Clean setting.
The available settings are
Enabled or Disabled.
5 Press
Select.
To return to the
Configuration screen without changing the option
setting, press
Cancel.
Note: The default setting is
MAP.
Note: You must reboot the library before this setting will take
effect.
Note: The default setting is
Disabled.
Comentarios a estos manuales