Quantum TC-L53FN-AR Guía de usuario descargar pdf (Pagina 29)

Chapter 2 Installation Procedures

Installing the Tabletop LTO-5 Tape Drive

LTO-5 Tape Drive User’s Guide 15

Restarting the Internal Full-Height Tape Drive System

After connecting the internal drive interfaces:

1 Restart the workstation or server system.

2 Verify that the internal LTO-5 Full-Height Tape Drive comes on and

completes the Power On Self Test (POST) functions.

As required, proceed to Installing the LTO Driver Software

on page 19.

Installing the Tabletop LTO-5 Tape Drive

The installation of the internal LTO-5 tape drive differs depending on the

drive type: Half-Height or Full-Height. Refer to the following sections for

your drive type.

• Installing the Tabletop LTO-5 Half-Height Tape Drive

• Installing the Tabletop LTO-5 Full-Height Tape Drive

Installing the Tabletop

LTO-5 Half-Height Tape

Drive

To install the tabletop LTO-5 Half-Height Tape Drive, complete the

following procedures in the order presented:

1 Connecting the Tabletop Half-Height Drive Interface and AC Power

Cables

2 Restarting the Tabletop Half-Height Tape Drive System on page 17

3 Installing the LTO Driver Software

on page 19, if required

Connecting the Tabletop Half-Height Drive Interface and AC

Power Cables

As shown in figure 8, the rear panel of the tabletop LTO-5 Half-Height

Tape Drive has connectors for:

• A 26-pin SFF-8088 mini-SAS style interface cable

•The AC power cable

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 95 96

Sin comentarios

Quantum TC-L53FN-AR Guía de usuario Pagina 29