Quantum TC-L53FN-AR Guía de usuario descargar pdf (Pagina 42)

Chapter 3 Operation

Using LTO Tape Cartridges

28 LTO-5 Tape Drive User’s Guide

Using LTO Tape Cartridges

Loading a Tape

Cartridge

To load an Ultrium tape cartridge into the LTO-5 Tape Drive, gently insert

the cartridge into the slot and then either:

• Push the cartridge further into the drive until the drive senses the

cartridge and automatically completes the load operation.

• Use a library or host command to complete the load operation.

Unloading a Tape

Cartridge

To unload an Ultrium tape cartridge from the LTO-5 Tape Drive, either:

• Use a library or host command to unload the tape.

• Press the Eject button on the front panel of the drive.

Caution: After you press the Eject button, several minutes can

elapse before the drive ejects the cartridge. Do not power

down the tape drive or the host computer until the drive

has completely ejected the cartridge.

Drive Error FLASHING. (Other

LEDs may be flashing.)

The drive mechanism has

detected an error.

Load a new cartridge. If the error persists, power

cycle or reset the drive.

If the Drive Error LED remains on, call for service.

Drive Error and Ready ON with

Tape Error and Clean OFF.

Sequence alternates repeatedly.

The drive has a firmware error.

Power cycle or reset the drive. If the sequence

reoccurs, upgrade the firmware. If the condition

persists, call for service.

LED Condition Action Required

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 95 96

Sin comentarios

Quantum TC-L53FN-AR Guía de usuario Pagina 42