Quantum TC-L53FN-AR Guía de usuario descargar pdf (Pagina 31)

Chapter 2 Installation Procedures

Installing the Tabletop LTO-5 Tape Drive

LTO-5 Tape Drive User’s Guide 17

5 Reconnect the workstation or server system AC power cord to the

facility AC power receptacle.

After connecting the tabletop drive interface and AC power cables,

proceed to Restarting the Tabletop Half-Height Tape Drive System

in the

following subsection.

Restarting the Tabletop Half-Height Tape Drive System

After connecting the tabletop drive interface and AC power cables:

1 Set the tabletop drive AC power switch to the on position.

2 Restart the workstation or server system.

3 Verify that the tabletop LTO-5 Half-Height Tape Drive comes on and

completes the Power On Self Test (POST) functions.

As required, proceed to Installing the LTO Driver Software

Installing the Tabletop

LTO-5 Full-Height Tape

Drive

To install the tabletop LTO-5 Full-Height Tape Drive, complete the

following procedures in the order presented:

1 Connecting the Full-Height Tabletop Drive Interface and AC Power

Cables

2 Restarting the Tabletop Full-Height Tape Drive System on page 19

3 Installing the LTO Driver Software

on page 19, if required

Connecting the Full-Height Tabletop Drive Interface and AC

Power Cables

As shown in figure 9, the rear panel of the tabletop LTO-5 Full-Height

Tape Drive has connectors for:

• A 26-pin SFF-8088 mini-SAS style interface cable

•The AC power cable

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 95 96

Sin comentarios

Quantum TC-L53FN-AR Guía de usuario Pagina 31