Quantum LTO 2U Instrucciones de operaciones Pagina 105

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 264
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 104
JULY 2007 MAGNUM 224, MAGNUM 448, STORAGELIBRARY T24, OR STORAGELOADER 2U
9-9
WHAT YOU SEND TO THE LIBRARY
MaxStor – Byte 4, Bit 7
This field specifies whether the number of available storage elements is limited
to the value specified in the MaxStorAddr field, as follows:
The factory default is 0.
The MaxStor field is directly related to the Limit Cells option available from
the library’s operator panel. The option to limit the number of cells can be set,
cleared, or viewed using the operator panel or by issuing a MODE SELECT
command with this field set to 1.
This field is kept in nonvolatile RAM, and once set, remains in effect, even
between power-on cycles, until changed by this command.
MaxStorAddr – Byte 4, Bits 5 through 0
This field specifies how many storage elements the library reports and uses.
Magnum 224 or StorageLibrary T24—The library may have up to 24 storage
slots. Valid values for this field are 4 through 24 (18h). The factory default
is 18h. The library ignores the MaxStorAddr field if the MaxStor bit is set to 0.
If the MaxStorAddr field is set to 24 (18h), the library responds as if the
MaxStor bit is set to 0.
StorageLoader 2U LTO—The library may have up to 20 storage slots. Valid
values for this field are 4 through 20 (14h). The factory default is 14h. The
library ignores the MaxStorAddr field if the MaxStor bit is set to 0. If the
MaxStorAddr field is set to 20 (14h), the library responds as if the MaxStor bit
is set to 0.
Magnum 448—The Magnum 448 LTO Library may have up to 48 storage
slots. Valid values for this field are 4 through 48 (30h). The factory default
is 30h. The library ignores the MaxStorAddr field if the MaxStor bit is set to 0.
If the MaxStorAddr field is set to 48 (30h), the library responds as if the
MaxStor bit is set to 0.
Notes:
The MaxStorAddr is a maximum slot count that the library will use. If the count
is less for any reason (I/E Port, Cleaning Slot, a blank magazine without slots) the
smaller number will be used.
0
Do not limit the number of available storage elements (use
all of the cartridge cells as storage elements)
1
Limit the number of available storage elements to the
value specified in the MaxStorAddr field
Vista de pagina 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 263 264

Comentarios a estos manuales

Sin comentarios