Quantum TC-L32BX-EY Guía de usuario descargar pdf (Pagina 28)

Chapter 2 Installation Procedures

Installing the Internal LTO-3 Half-Height Tape Drive

LTO-3 Half-Height Tape Drive User’s Guide 14

Figure 4 Acceptable Mounting

Orientation

Mount the drive in a 5.25-inch, half-height drive bay as follows:

1 As required:

a Save and close your open files and terminate all running

applications.

b Shut down the workstation or server system.

c Disconnect the system AC power cord from the facility AC

power receptacle.

2 Remove the cover from the workstation or server system.

3 Select an available 5.25-inch half-height bay and, if required, remove

the bay cover.

4 Position the drive in the bay and align either the upper or lower

mounting holes—whichever is appropriate—with the holes in the

chassis (see figure 5).

5 Secure the drive using two M3.0 X 4 metric screws on each side.

After mounting the internal LTO-3 Half-Height Tape Drive, proceed to

onnecting the Internal Drive Interface and DC Power Cables in the

following subsection.

Note: See your computer manufacturer’s instructions for the

proper procedures to remove the cover.

Caution: Using screws longer than 4 mm can damage the drive.

Do not use screws longer than 4 mm to secure the

internal LTO-3 Half-Height Tape Drive.

YES YES YES NO

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 108 109

Sin comentarios

Quantum TC-L32BX-EY Guía de usuario Pagina 28