Quantum TC-L32BX-EY Guía de usuario descargar pdf (Pagina 30)

Chapter 2 Installation Procedures

Installing the Internal LTO-3 Half-Height Tape Drive

LTO-3 Half-Height Tape Drive User’s Guide 16

• See the internal parallel SCSI bus termination examples in

figure 3

on page 13 to check/verify the system SCSI bus

configuration and install a 68-pin LVD SCSI bus terminator

as required.

b For the SAS internal drive, attach the internal SAS interface cable

to the 7-pin 1x SATA style SAS connector on the back of the

drive.

Figure 6 Internal SCSI Drive

Interface and DC Power

Connectors

Figure 7 Internal SAS Drive

Interface and DC Power

Connectors

3 If you are installing the internal LTO-3 Half-Height Tape Drive in a

tape library system, connect the RS-422 serial interface cable to the

serial library port on the back of the drive. (The serial library port is

not used on workstation or server systems.)

68-pin parallel SCSI connector

Serial library port

DC power connector

Serial library port

DC power connector 7-pin 1x SATA style SAS connector

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 108 109

Sin comentarios

Quantum TC-L32BX-EY Guía de usuario Pagina 30