Quantum TC-L32BX-EY Guía de usuario Pagina 95

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 109
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 94
Chapter 7 Troubleshooting Guide
Troubleshooting Suggestions
LTO-3 Half-Height Tape Drive User’s Guide 81
Write-Protected TapeAlert Messages 7
Write-protected TapeAlert messages can appear in response to:
Actual write-protected tape cartridges
Defective tape cartridges
Cartridges of a type that appear to be write protected
This TapeAlert message . . . Signifies . . .
You are trying to write to a write-
protected cartridge. Remove the
write-protection or use another
tape.
that you are trying to write to a
tape cartridge that is actually
write protected.
1 Eject the tape cartridge
from the drive.
2 Set the cartridge write-
protect switch to the
unlocked (read-enabled)
position (see figure 13
on
page 39).
3 Retry the backup operation.
The memory in the tape cartridge
has failed, which reduces
performance. Do not use the
cartridge for further backup
operations.
and/or:
You have loaded a cartridge of a
type that is read-only in this drive.
The cartridge will appear as write-
protected.
you are trying to write to a tape
cartridge that is either defective
(failed Cartridge Memory chip),
or the wrong type.
Retry the backup operation
using a known good cartridge
of the proper type.
If the problem persists, contact
Technical Support to resolve
the possible problem with the
tape drive.
Overwrite protection is set to
<setting>. Click OK to overwrite the
media or insert new media that can
be overwritten.
a software-related problem.
Refer to the documentation for
your backup software for
information on the overwrite
and append settings.
Vista de pagina 94
1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 108 109

Comentarios a estos manuales

Sin comentarios