Quantum TC-L32BX-EY Guía de usuario descargar pdf (Pagina 33)

Chapter 2 Installation Procedures

Installing the Tabletop LTO-3 Half-Height Tape Drive

LTO-3 Half-Height Tape Drive User’s Guide 19

Configuring the Tabletop

Parallel SCSI Tape Drive 2

The factory-set default configuration of the tabletop parallel SCSI LTO-3

Half-Height Tape Drive is:

• SCSI ID: 6

• Terminator power: enabled

Configuring the Tabletop Drive Parallel SCSI ID

Each device on the parallel SCSI bus must have its own unique SCSI ID.

Use the push-button SCSI ID selector switch on the drive back panel to

change the SCSI ID of the tabletop LTO-3 Half-Height Tape Drive (see

figure 8

IF the default parallel SCSI

ID configuration is . . .

THEN you can . . .

compatible with your system

SCSI bus,

skip the following subsection and

proceed to Connecting the Tabletop

Drive Interface and AC Power Cables

on page 21.

already assigned to another

device,

change the configuration of either the

other device, or the LTO-3 Half-

Height Tape Drive, as described in

the following subsection.

Note: You cannot disable terminator power on a tabletop parallel

SCSI drive.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 108 109

Sin comentarios

Quantum TC-L32BX-EY Guía de usuario Pagina 33