Quantum TC-L32BX-EY Guía de usuario descargar pdf (Pagina 31)

Chapter 2 Installation Procedures

Installing the Tabletop LTO-3 Half-Height Tape Drive

LTO-3 Half-Height Tape Drive User’s Guide 17

4 Connect the internal drive DC power cable to the DC power

connector on the back of the drive.

5 Reinstall the system cover.

6 Reconnect the system AC power cord to the facility AC power

receptacle.

After connecting the interface and DC power cables, proceed to

Restarting the Internal

Tape Drive System in the following subsection.

Restarting the Internal

Tape Drive System 2

After connecting the internal drive interface and DC power cables:

1 Restart the workstation or server system.

2 Refer to the operating procedures in chapter 4

to verify that the

internal LTO-3 Half-Height Tape Drive comes on and completes the

Power On Self Test (POST) functions.

3 As required, proceed to either:

• Installing the LTO Driver Software

on page 25

• Registering the LTO-3 Half-Height Tape Drive

on page 25

Installing the Tabletop LTO-3 Half-Height Tape Drive

The tabletop LTO-3 Half-Height Tape Drive is a compact external drive

that connects to the host computer through an external parallel SCSI port

or an external serial-attached SCSI (SAS) port.

Do not attempt to install the LTO-3 Half-Height Tape Drive until you

have reviewed Handling Precautions and Installation Guidelines

page 6.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 108 109

Sin comentarios

Quantum TC-L32BX-EY Guía de usuario Pagina 31