Quantum TC-L32BX-EY Guía de usuario descargar pdf (Pagina 44)

Chapter 3 UNIX Configuration Procedures

Configuring IBM AIX UNIX Environments

LTO-3 Half-Height Tape Drive User’s Guide 30

c When using commands that require tape density and size

settings, the tape:

• Density is 124,000 bpi

• Length is 1800 feet

Note, however, that the

ufsdump and ufsrestore commands are

preferred, as they automatically detect end-of-tape without the

need for tape density and length settings.

d When writing data to tape, use the

c option to enable data

compression. For example,

tar cf /dev/rmt/0c causes the tape drive

to compress the data before writing to tape.

Configuring IBM AIX UNIX Environments

This subsection provides procedures for configuring IBM AIX Version

4.1x and later UNIX operating system environments.

Finding Existing SCSI

Controllers and Devices 3

Use the lsdev–Cs scsi command to identify the installed SCSI devices and

controllers.

Note the existing SCSI device IDs and verify that the SCSI ID for the LTO-

3 Half-Height Tape Drive does not conflict with the other IDs shown by

the

lsdev command.

Configuring the UNIX

Environment 3

Procedure

Use the

Other SCSI Tape Drive option of the SMIT utility to configure AIX:

1 Enter SMIT at the Tape Drive menu by typing

smit tape.

2 Select

Add a tape Drive.

3 Use the

Other SCSI Tape Drive option to specify the type of tape drive

you will be adding.

4 Select

Parent SCSI Adapter from the available list to display the Add a

tape Drive “Entry Fields”

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 108 109

Sin comentarios

Quantum TC-L32BX-EY Guía de usuario Pagina 44